Introduction
The Large Hadron Collider smashes particles together at nearly light speed so physicists can study the resulting debris. Those collisions have already produced landmark discoveries, but CERN is preparing for an even more ambitious phase. After 2030, the High-Luminosity LHC is expected to generate far more particle interactions per second, giving researchers a better shot at spotting rare phenomena. Making that possible requires magnets stronger and more compact than anything currently installed in the ring.
What Happened
CERN's existing dipole magnets rely on niobium-titanium coils and top out at 8.3 tesla. That limit has been reached, so engineers turned to niobium-tin, or Nb3Sn, for the new quadrupole magnets. The material is promising but difficult to work with because it is brittle and cracks under the strain of traditional winding.
To solve this, a team led by magnet engineer Susana Izquierdo Bermúdez used a wind-and-react method. Workers first wrap a 760-meter cable into coils roughly 7.2 meters long with a 150-millimeter opening. Only after the coil is shaped does it undergo a multi-day heat treatment, climbing to about 650 degrees Celsius, which transforms the niobium and tin into the superconducting Nb3Sn phase. The coils are then impregnated with liquid epoxy and cured into a rigid form.
According to research published on 24 September in IEEE Transactions on Applied Superconductivity, the group manufactured more than 250 coils for magnets ranging from 4.5 to 7.2 meters in length. About 25 coils did not pass muster, sometimes because of a single stray metal particle. In September, the finished 7.2-meter magnets reached 11.3 tesla during quality-control testing, and CERN is now building spares.
Why This Matters
Higher luminosity means more collisions. CERN aims to reach between 140 and 200 particle interactions during each of 40 million bunch crossings per second. That volume increases the odds of observing rare particles or events that standard runs might miss. But packing that much energy into a tight space demands magnets that are both powerful and precise. The Nb3Sn quadrupole magnets are designed to meet that challenge, fitting into compact spaces while delivering nearly 12 tesla of field strength.
Key Takeaways
- CERN is upgrading the Large Hadron Collider to a high-luminosity configuration scheduled to begin after 2030.
- New quadrupole magnets use brittle niobium-tin coils instead of the niobium-titanium found in current dipoles.
- The wind-and-react process forms the superconducting material only after the coil is wound.
- Tested magnets achieved 11.3 tesla, well above the 8.3-tesla ceiling of older technology.
- More than 250 coils were produced, with roughly 25 rejected during quality control.
- A study outlining the work appeared in IEEE Transactions on Applied Superconductivity on 24 September.
Conclusion
The new magnets represent years of collaboration across an international team of engineers and technicians. With the first units validated and backup production underway, CERN is moving closer to the next era of particle physics. If the High-Luminosity LHC performs as planned, these superconducting coils could help uncover physics beyond the Standard Model, one high-energy collision at a time.

Discussion
Join the conversation
Thoughtful reactions, questions, and follow-up ideas help shape the next story.